Gavita Pro 630e CMH
Gavita Pro 630e CMH
The Gavita Pro 630e is available with the Philips 315W 3100° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). The Repeater Bus interface enables external control with the Gavita Master controllers.
Specifications
- Input current at 100%
- Input power at 100%
- Light source
- Reflector
- Lamp base
- Input voltage : 208 Volt
- Input current at 100% : 3.2 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 CMH 630
- Lamp base : PGZX18
- Input voltage : 240 Volt
- Input current at 100% : 2.5 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 SE CMH 630
- Lamp base : PGZX18
- Input current at 100%
- Input power at 100%
- Light source
- Reflector
- Lamp base
- Input voltage : 240 Volt
- Input current at 100% : 2.5 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 CMH 630
- Lamp base : PGZX18
Specifications
- Input current at 100%
- Input power at 100%
- Light source
- Reflector
- Lamp base
- Input voltage : 208 Volt
- Input current at 100% : 3.2 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 CMH 630
- Lamp base : PGZX18
- Input voltage : 240 Volt
- Input current at 100% : 2.5 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 SE CMH 630
- Lamp base : PGZX18
- Input current at 100%
- Input power at 100%
- Light source
- Reflector
- Lamp base
- Input voltage : 240 Volt
- Input current at 100% : 2.5 Amps
- Input power at 100% : 660 Watt
- Light source : Philips CDM Elite 315W 930 Agro or 942
- Reflector : M 132 CMH 630
- Lamp base : PGZX18
Features & Benefits
Suitable for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3100°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
No moving parts, optimal thermal management
Our ballasts are completely sealed and passively cooled through the aluminum housing. The optimized thermal management keeps the electronics much cooler than in die-cast housings. This extremely important for the lifetime and reliability of the internal electronics.
Balanced fixture
The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.
Suitable for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3100°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
No moving parts, optimal thermal management
Our ballasts are completely sealed and passively cooled through the aluminum housing. The optimized thermal management keeps the electronics much cooler than in die-cast housings. This extremely important for the lifetime and reliability of the internal electronics.
Balanced fixture
The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.
Features & Benefits
Suitable for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3100°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
No moving parts, optimal thermal management
Our ballasts are completely sealed and passively cooled through the aluminum housing. The optimized thermal management keeps the electronics much cooler than in die-cast housings. This extremely important for the lifetime and reliability of the internal electronics.
Balanced fixture
The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.
Suitable for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3100°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
No moving parts, optimal thermal management
Our ballasts are completely sealed and passively cooled through the aluminum housing. The optimized thermal management keeps the electronics much cooler than in die-cast housings. This extremely important for the lifetime and reliability of the internal electronics.
Balanced fixture
The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.
More information
The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.
The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop.
Contact your local Gavita representative or our support page for more information on recommended use and positioning of our CMH fixtures in stand alone and supplemental applications.
More information
The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.
The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop.
Contact your local Gavita representative or our support page for more information on recommended use and positioning of our CMH fixtures in stand alone and supplemental applications.
