Retail and indoor projects

Gavita ECM1

Gavita ECM1

Gavita ECM1

For our EL2 controllers we developed an External Contactor Module, the ECM1. As the Master Controller works on a low voltage output, it is not capable of switching auxiliary equipment. With the ECM1 you can extend the functionality of your EL2 controller to switch auxiliary equipment, such as heaters, dehumidifiers and CO2 equipment during the lights on or lights off cycle, according to the controller set lighting hours.

Specifications

ECM Voltage 120-240V
ECM Current 15A AC3
ECM Switch type DPST (Double pole, single throw)
ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
ECM Steering Input Low voltage from controller, cage clamps
ECM On-indication Blue LED
Warranty 3 years
  • ECM Voltage 120-240V
  • ECM Current 15A AC3
  • ECM Switch type DPST (Double pole, single throw)
  • ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
  • ECM Steering Input Low voltage from controller, cage clamps
  • ECM On-indication Blue LED
  • Warranty 3 years

Specifications

ECM Voltage 120-240V
ECM Current 15A AC3
ECM Switch type DPST (Double pole, single throw)
ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
ECM Steering Input Low voltage from controller, cage clamps
ECM On-indication Blue LED
Warranty 3 years
  • ECM Voltage 120-240V
  • ECM Current 15A AC3
  • ECM Switch type DPST (Double pole, single throw)
  • ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
  • ECM Steering Input Low voltage from controller, cage clamps
  • ECM On-indication Blue LED
  • Warranty 3 years

Features & Benefits

Plug and play installation

Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

Status signaling

Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.

Requires no external power

The contactor in the ECM is activated by the power of the controller. No power supply is required, just one signal wire to the controller.

Switches auxiliary equipment up to 15A

Safely switch your auxiliary equipment on and off based on light cycle, using a high quality European contactor.

Available in local plug versions

The ECM1 is available with EU, US (120 and 240), EU, UK, AUS, IT and other plugs.

Plug and play installation

Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

Status signaling

Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.

Requires no external power

The contactor in the ECM is activated by the power of the controller. No power supply is required, just one signal wire to the controller.

Switches auxiliary equipment up to 15A

Safely switch your auxiliary equipment on and off based on light cycle, using a high quality European contactor.

Available in local plug versions

The ECM1 is available with EU, US (120 and 240), EU, UK, AUS, IT and other plugs.

Features & Benefits

Plug and play installation

Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

Status signaling

Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.

Requires no external power

The contactor in the ECM is activated by the power of the controller. No power supply is required, just one signal wire to the controller.

Switches auxiliary equipment up to 15A

Safely switch your auxiliary equipment on and off based on light cycle, using a high quality European contactor.

Available in local plug versions

The ECM1 is available with EU, US (120 and 240), EU, UK, AUS, IT and other plugs.

Plug and play installation

Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

Status signaling

Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.

Requires no external power

The contactor in the ECM is activated by the power of the controller. No power supply is required, just one signal wire to the controller.

Switches auxiliary equipment up to 15A

Safely switch your auxiliary equipment on and off based on light cycle, using a high quality European contactor.

Available in local plug versions

The ECM1 is available with EU, US (120 and 240), EU, UK, AUS, IT and other plugs.

More information

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs). These industry grade contactor units can switch a load up to 15 amps of accessories during either lights on or lights off period. As the ECMs are steered by a low voltage signal you can even locate them close to the accessories themselves, enabling easy installation and optimal flexibility. The come with localized male and female plugs so that installing auxiliary equipment is just a matter of plug and play.

More information

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs). These industry grade contactor units can switch a load up to 15 amps of accessories during either lights on or lights off period. As the ECMs are steered by a low voltage signal you can even locate them close to the accessories themselves, enabling easy installation and optimal flexibility. The come with localized male and female plugs so that installing auxiliary equipment is just a matter of plug and play.