Retail and indoor projects

Pro 270e LEP SUP / GROW

GAVITA PRO 270e LEP NEW MODEL

Pro 270e LEP SUP / GROW

When it comes to lighting plants you need both quantity and quality. To further optimize the quality of your crop we introduced supplemental plasma light. lt adds everything to HPS light your plant needs to bring it to the next level, including UVB and UVA. There is no light source like it.

Specifications

  •  
  • Input current at 100%
  • Input power at 100%
  • Light source
  • Input voltage : 120 - 240 Volt
  • Input current at 100% : 2.75 - 1.1 Amps
  • Input power at 100% : 290 Watt
  • Light source : LUXIM LiFi STA 41.01 / 41.02 plasma emitter

Specifications

  •  
  • Input current at 100%
  • Input power at 100%
  • Light source
  • Input voltage : 120 - 240 Volt
  • Input current at 100% : 2.75 - 1.1 Amps
  • Input power at 100% : 290 Watt
  • Light source : LUXIM LiFi STA 41.01 / 41.02 plasma emitter

Features & Benefits

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

FCC compliant

All our fixtures are FCC approved. No fake Chinese certificates: our FCC certificates are from a US lab and all our boxes include an official declaration of conformity with report number. Our retail fixtures are FCC class B compliant, our industrial fixtures minimal FCC class A. We check our production by sampling, and measure the EMI in our own test room for continuing compliance. FCC approval however does not mean that there is no EMI: it just confirms that they are within the legal limits.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Miro aluminum reflector

Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration.

Suitable for Gavita Master Controllers

Our e-series ballasts can be remote controlled by our Gavita Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When you climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems.

Plug & Play installation

Connect your fixtures to the master controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

FCC compliant

All our fixtures are FCC approved. No fake Chinese certificates: our FCC certificates are from a US lab and all our boxes include an official declaration of conformity with report number. Our retail fixtures are FCC class B compliant, our industrial fixtures minimal FCC class A. We check our production by sampling, and measure the EMI in our own test room for continuing compliance. FCC approval however does not mean that there is no EMI: it just confirms that they are within the legal limits.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Miro aluminum reflector

Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration.

Suitable for Gavita Master Controllers

Our e-series ballasts can be remote controlled by our Gavita Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When you climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems.

Plug & Play installation

Connect your fixtures to the master controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

Features & Benefits

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

FCC compliant

All our fixtures are FCC approved. No fake Chinese certificates: our FCC certificates are from a US lab and all our boxes include an official declaration of conformity with report number. Our retail fixtures are FCC class B compliant, our industrial fixtures minimal FCC class A. We check our production by sampling, and measure the EMI in our own test room for continuing compliance. FCC approval however does not mean that there is no EMI: it just confirms that they are within the legal limits.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Miro aluminum reflector

Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration.

Suitable for Gavita Master Controllers

Our e-series ballasts can be remote controlled by our Gavita Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When you climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems.

Plug & Play installation

Connect your fixtures to the master controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

FCC compliant

All our fixtures are FCC approved. No fake Chinese certificates: our FCC certificates are from a US lab and all our boxes include an official declaration of conformity with report number. Our retail fixtures are FCC class B compliant, our industrial fixtures minimal FCC class A. We check our production by sampling, and measure the EMI in our own test room for continuing compliance. FCC approval however does not mean that there is no EMI: it just confirms that they are within the legal limits.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Miro aluminum reflector

Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration.

Suitable for Gavita Master Controllers

Our e-series ballasts can be remote controlled by our Gavita Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When you climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems.

Plug & Play installation

Connect your fixtures to the master controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

More information

Recommended use

  • Only use the full spectrum LEP (41.02 GROW) for high quality sunlight simulation, for example for preserving genetics.
  • For all other uses we recommend a combination of supplemental LEP (41.01 SUP) and HPS, according to the following table:
PhaseLEP type Recommended PPFD LEP to HPS ratio *)
Genetics preservationLEP 270e GROW 200-400 μmol s-1m-2 n/a
Mother plants LEP 270e SUP 300-500 μmol s-1m-2 1 LEP:100-150W HPS
VegetativeLEP 270e SUP 450-700 μmol s-1m-2 1 LEP:600W HPS
GenerativeLEP 270e SUP 700-1000 μmol s-1m-2 1 LEP:1000W HPS

*) specs are minimal recommended values. In general more LEP has a positive effect on the quality. For mothers though we recommend a minimum of 100W HPS per LEP fixture.

For plants that grow in a climate room under HPS light, the quality of the light leaves much to be desired. Plants have evolved under sunlight for millions of years and a balanced full spectrum light, including UVA and UVB, is the best they can get. Enter plasma technology.

Our Light Emitting Plasma (LEP) fixture is available as a full spectrum source, almost exactly like the sun, or as a supplemental spectrum to fill in the spectrum that HPS lacks. Both include UVA and UVB by using a UV transmitting glass filter. With a lifetime of 30,000 (full spectrum) to 50,000 hours (supplemental spectrum) the Gavita Pro 270e LEP ensures great return of investment. In fact on high value crops you earn it back within two crop cycles. HPS is still a great light source as it is very efficient, but you need quantity and quality. HPS is for quantity, plasma is for quality.

Compliance and safety

The reflector is equipped with the fine wire mesh filter preventing EMI so it fully complies with FCC, UL and CE standards. All our products are manufactured according to the highest horticultural standards.

Suitable for Gavita Master Controller

All our Pro line e-series fixtures are suitable for the Gavita Master Controller. Now you can centrally control your HPS and plasma fixtures with one simple push of a button: switch, dim and boost your HPS fixtures and switch your LEP fixtures. You can control up to 80 e-series fixtures with one controller, or expand that number to hundreds with our B200 booster.

More information

Recommended use

  • Only use the full spectrum LEP (41.02 GROW) for high quality sunlight simulation, for example for preserving genetics.
  • For all other uses we recommend a combination of supplemental LEP (41.01 SUP) and HPS, according to the following table:
PhaseLEP type Recommended PPFD LEP to HPS ratio *)
Genetics preservationLEP 270e GROW 200-400 μmol s-1m-2 n/a
Mother plants LEP 270e SUP 300-500 μmol s-1m-2 1 LEP:100-150W HPS
VegetativeLEP 270e SUP 450-700 μmol s-1m-2 1 LEP:600W HPS
GenerativeLEP 270e SUP 700-1000 μmol s-1m-2 1 LEP:1000W HPS

*) specs are minimal recommended values. In general more LEP has a positive effect on the quality. For mothers though we recommend a minimum of 100W HPS per LEP fixture.

For plants that grow in a climate room under HPS light, the quality of the light leaves much to be desired. Plants have evolved under sunlight for millions of years and a balanced full spectrum light, including UVA and UVB, is the best they can get. Enter plasma technology.

Our Light Emitting Plasma (LEP) fixture is available as a full spectrum source, almost exactly like the sun, or as a supplemental spectrum to fill in the spectrum that HPS lacks. Both include UVA and UVB by using a UV transmitting glass filter. With a lifetime of 30,000 (full spectrum) to 50,000 hours (supplemental spectrum) the Gavita Pro 270e LEP ensures great return of investment. In fact on high value crops you earn it back within two crop cycles. HPS is still a great light source as it is very efficient, but you need quantity and quality. HPS is for quantity, plasma is for quality.

Compliance and safety

The reflector is equipped with the fine wire mesh filter preventing EMI so it fully complies with FCC, UL and CE standards. All our products are manufactured according to the highest horticultural standards.

Suitable for Gavita Master Controller

All our Pro line e-series fixtures are suitable for the Gavita Master Controller. Now you can centrally control your HPS and plasma fixtures with one simple push of a button: switch, dim and boost your HPS fixtures and switch your LEP fixtures. You can control up to 80 e-series fixtures with one controller, or expand that number to hundreds with our B200 booster.

Product video's

Gavita Plasma light: introduction & benefits‬‬‬‬‬

– What is Plasma lighting en how does it work?
– What are the benefits of using Plasma light?
– How do you use plasma light?

Product video's

Gavita Plasma light: introduction & benefits‬‬‬‬‬

– What is Plasma lighting en how does it work?
– What are the benefits of using Plasma light?
– How do you use plasma light?